Miller Guitar Works
Hand-built instruments · Each one is the only one

Built at
the bench.

Fourteen instruments are ready for new homes. Every body is cut, routed, stained, wired and set up by hand in a home shop. Click any guitar to see the full build, from raw blank to final strings.

14For sale
395Build photos

Available now

Click a photo to open the gallery
No. 01Available

FB1Six-string · Natural · Mini humbuckers

A long, swept reverse body left close to natural so the wood grain does the talking, framed by a black pickguard. Two mini humbuckers give it a bright, cutting voice with more bite than a full-size pickup. The very first build on the bench.

Body
Reverse offset shape, natural finish, black guard
Neck
Rosewood fretboard, 22 frets, dot inlays
Pickups
2 × mini humbuckers, chrome covers
Bridge
Tune-o-matic with stop tailpiece, chrome
Controls
2 volume, 2 tone, 3-way toggle
Built
Jan – Feb 2017
$1,100Example Inquire
No. 02Available

RB4Four-string bass · Ocean teal

A cresting-wave bass body with deep open grain stained teal, framed by a cream binding line. Shark-fin inlays run the full board and a natural-wood headstock caps it off. Punchy, bright and built to be heard.

Body
Open-grain ash, teal stain, bound edge
Neck
Dark fretboard, triangle inlays, natural headstock
Pickups
2 single-coil bass pickups, chrome covers
Bridge
Chrome 4-saddle bridge
Controls
2 volume, 2 tone, pickup toggle
Built
Nov 2017
$1,650Example Inquire
No. 03Available

SC1Six-string · Blue stain · S/S/S

An early build from 2017. A classic double-cutaway body in a deep blue stain with the grain showing through, three single-coil pickups under a white guard, and a tremolo for bending notes. Bright, glassy and easy to play.

Body
Double-cutaway, contoured, blue stain
Neck
Rosewood fretboard, 21 frets, dot inlays, natural headstock
Pickups
3 × single-coil
Bridge
Chrome tremolo with arm
Controls
Volume, 2 tone, 5-way switch
Built
Jun 2017
$950Example Inquire
No. 04Available

SG12Double neck · 12 + 6 · Cherry

The showpiece. A twelve-string and a six-string share one double-cutaway body in a deep cherry stain. Four chrome humbuckers, a neck selector between them, and parallelogram inlays on both boards.

Body
Solid double-cutaway, cherry stain, black guard
Necks
12-string and 6-string, parallelogram inlays
Pickups
4 × chrome-cover humbuckers
Bridges
2 × tune-o-matic with stop tailpieces
Controls
2 volume, 2 tone, neck selector, 2 pickup toggles
Built
Jan – Feb 2019
$2,400Example Inquire
No. 05Available

TC1Six-string · Silver · B/G/D bender

A slab single-cut body sprayed metallic silver, with a black guard and a roasted maple neck. The secret is at the tail: a Hipshot B/G/D bender that pulls the B, G and D strings up for pedal-steel style bends with a nudge of the strap.

Body
Single-cutaway slab, metallic silver finish
Neck
Maple fretboard, 22 frets, black dot inlays
Pickups
2 × single-coil, neck and bridge
Bridge
Chrome bridge plate, Hipshot B/G/D bender
Controls
Volume, tone, 3-way switch
Built
2019 · bender added Mar 2020
$1,250Example Inquire
No. 06Available

EXP1Six-string · Green stain

A sharp-angled offset body soaked in a translucent green stain that lets the grain show through. Blacked-out hardware and a pair of EMG humbuckers make it a high-gain machine. Built from a single blank over five weeks.

Body
Solid wood, offset angular shape, hand-rubbed green stain
Neck
Dark fretboard, pearl dot inlays, pointed headstock
Pickups
2 × EMG humbuckers
Bridge
Tune-o-matic with stop tailpiece, black
Controls
Volume, tone, 3-way toggle
Built
Mar – Apr 2019
$1,450Example Inquire
No. 07Available

LP1Six-string · TV yellow · Spalted top

A carved single-cut with a spalted maple top, where dark lines run through the wood like ink, finished in a bright TV yellow and wrapped in cream binding. Alnico II Pro Slash humbuckers give it warm, singing lead tone. The longest build on the list, with 42 photos from top to strings.

Body
Single-cutaway, spalted maple top, cream binding
Neck
Rosewood fretboard, 22 frets, trapezoid inlays
Pickups
2 × Alnico II Pro Slash humbuckers
Bridge
Tune-o-matic with stop tailpiece, chrome
Controls
2 volume, 2 tone, 3-way toggle
Built
Sep 2019 – Jan 2020
$1,600Example Inquire
No. 08Available

LPJ1Six-string · Blueburst · Single P90

Stripped back on purpose. A flat single-cut body stained teal in the middle and burst to deep blue at the edges, with a matching teal headstock. One P90, one volume, one tone and a wraparound bridge. Plug in and play.

Body
Single-cutaway slab, teal-to-blue burst stain
Neck
Rosewood fretboard, 22 frets, dot inlays
Pickups
1 × P90
Bridge
Wraparound, chrome
Controls
Volume, tone
Built
Nov 2019 – Jan 2020
$850Example Inquire
No. 09Available

SC MiniShort scale · Midnight blue · S/S/S

A scaled-down double-cut with a dark midnight-blue stain over open grain, a white guard and three single coils. The short neck and roasted maple headstock make it easy to grab for travel, couch practice or a young player’s first real guitar.

Body
Mini double-cutaway, dark blue stain
Neck
Short scale, rosewood fretboard, 20 frets, roasted maple headstock
Pickups
3 × single-coil
Bridge
Hardtail, chrome
Controls
Volume, 2 tone, 5-way switch
Built
Mar – Apr 2020
$650Example Inquire
No. 10Available

3351Semi-hollow · Trans grey · Flame top

A thinline semi-hollow with a flamed top stained translucent grey, so the figure shimmers as it turns in the light. White binding, twin f-holes, two humbuckers and a split black headstock. Warm and airy clean, and it growls when pushed.

Body
Semi-hollow double-cutaway, flame top, white binding
Neck
Rosewood fretboard, 22 frets, dot inlays, black headstock
Pickups
2 × humbuckers
Bridge
Tune-o-matic with stop tailpiece, chrome
Controls
2 volume, 2 tone, 3-way toggle
Built
Apr 2020
$1,500Example Inquire
No. 11Available

SG1Six-string · Trans red · Twin humbuckers

Sharp twin horns and a thin, light body stained translucent red, with a matching red V headstock. Two humbuckers, trapezoid inlays and a tune-o-matic bridge. Easy to reach the top frets and built to rock.

Body
Double-cutaway, beveled edges, trans red stain
Neck
22 frets, trapezoid inlays, red V headstock
Pickups
2 × humbuckers, chrome covers
Bridge
Tune-o-matic with stop tailpiece, chrome
Controls
2 volume, 2 tone, 3-way toggle
Built
Feb – Jul 2020
$1,200Example Inquire
No. 12Available

SG2Six-string · Trans aqua · Twin P90s

The same twin-horn shape, cut from a fresh blank and soaked in a bright aqua stain that lets the grain ripple through. Two black P90s, black hardware and a matching aqua headstock. The most documented build here, with 52 photos from paper template to final setup.

Body
Double-cutaway, trans aqua stain
Neck
24 frets, rosewood fretboard, aqua headstock
Pickups
2 × P90, black covers
Bridge
Hardtail, black
Controls
Volume, tone, 3-way switch
Built
2020 – 2021
$1,150Example Inquire
No. 13Available

TC2Six-string · Gunmetal · Single P90

A stripped-down single-cut in satin gunmetal, with one P90, one knob and a black hardtail bridge. No pickguard and nothing extra. The body went through a few finishes over two years before it landed on this one, and all of it is in the gallery.

Body
Single-cutaway slab, satin gunmetal finish
Neck
Maple neck, dark fretboard, dot inlays
Pickups
1 × P90, black
Bridge
Hardtail, black
Controls
Volume
Built
Nov 2020 – Jan 2023
$1,000Example Inquire
No. 14Available

C24Six-string · Gunmetal · Single P90

A sculpted double-cut with a carved bevel, sprayed the same satin gunmetal as TC2 and fitted with a black headstock and tuners. One P90 and a black hardtail keep it simple. The newest build here and the most photographed, with 68 shots from template to finish.

Body
Double-cutaway, carved bevel, satin gunmetal finish
Neck
Dark fretboard, black headstock and tuners
Pickups
1 × P90, black
Bridge
Hardtail, black
Controls
Volume, tone
Built
Oct 2022 – Jan 2023
$1,300Example Inquire
Collection

Purchased Collection

The EXP1, start to finish

From blank
to strings.

Every instrument starts as a plain slab of wood and a paper template. These are the real stages of one build, photographed at the bench. Click any step to walk through all of it.

About the shop

Let's talk guitars.

I'm Dave. I build guitars and basses one at a time, by hand, in my own shop.

No two are the same. Each one gets its own template, its own stain and its own setup. If one of these speaks to you, send a note. I'm happy to share more photos, a sound clip, or arrange a time to play it in person.

Gallery

From the guitar inventory database

EXP1 · The Build

25 build photos · 10 seconds